Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Pump Suction

height

This topic has been archived. This means that you cannot reply to this topic.
7 replies to this topic
Share this topic:
| More

#1 PRkumar

PRkumar

    Junior Member

  • Members
  • 20 posts

Posted 18 May 2013 - 02:45 AM

what is the maximum suction side height we take ,when pump suck the fluid from well/vessel or other equipement?

Regards
pranav



#2 fallah

fallah

    Gold Member

  • ChE Plus Subscriber
  • 5,026 posts

Posted 21 May 2013 - 06:25 AM

pranav,

 

Pump's NPSHR would dictate such height if other parameters, say suction vessel elevation and low low liquid level..., are to be already fixed.



#3 PRkumar

PRkumar

    Junior Member

  • Members
  • 20 posts

Posted 22 May 2013 - 02:50 AM

dear fallah sir,

                      here i am talk for pump suction lift case.(For suction lift case what is the maximum height we take?)

 

Ragards

pranav



#4 fallah

fallah

    Gold Member

  • ChE Plus Subscriber
  • 5,026 posts

Posted 22 May 2013 - 04:10 AM

pranav,

 

It depends on fluid S.G. and local atmospheric pressure For water at sea level it is around 10 meters from liquid level. Then, maximum height of suction side from the liquid level:

 

H (m)=10/S.G



#5 breizh

breizh

    Gold Member

  • Admin
  • 6,984 posts

Posted 22 May 2013 - 07:00 AM

Pranav ,

 

Consider these documents and you will find your answers .

 

I'm sure it will help .

 

Breizh


Edited by breizh, 22 May 2013 - 07:03 AM.


#6 PRkumar

PRkumar

    Junior Member

  • Members
  • 20 posts

Posted 23 May 2013 - 04:48 AM

Dear all,

               thanks.

Best Regards

pranav



#7 SenOil

SenOil

    Veteran Member

  • Members
  • 48 posts

Posted 23 May 2013 - 05:15 PM

Dear Breizh, Fallah,

 

im looking for how to size a pump for water transportation application, the system consist to transport  water stored in water tank to the sea the distance is 15,000 ft .the water comes from our natural gas well after being separated its like a brine; the composition of this water is close to seawater.

for more details regarding my system design see attached file

 

System Data

 

 

 

1. type of power engine

Natural gas

2. cost of energy

 

3. pumping lift

13.12 ft

4. pump column pipe (suction line)

3-in. steel pipe

13. distance from pump to vessel

26 ft

5. system flow rate

132 gpm

6. yearly operating time

1000 hrs

7. distance from pump to pivot

14763.78 ft 3 inch PVC pipe

8. required operating pressure

15 psi

9. elevation change from pump to pivot

+49.21 ft

10. types of fittings in system

see drawings below

11. suction vessel pressure

14.5 psi

12. minimum liquid level above pumper center line

13.12 ft

 

many thanks to All for your help.

Attached Files



#8 thorium90

thorium90

    Gold Member

  • Members
  • 1,073 posts

Posted 24 May 2013 - 02:34 AM

Do refer back to the following thread.

 

http://www.cheresour...sel-to-the-sea/






Similar Topics