Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

How To Use Transfer Function Block For Dynamic Simulation


This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic
Share this topic:
| More

#1 planck12

planck12

    Brand New Member

  • Members
  • 7 posts

Posted 24 May 2014 - 11:06 PM

Hello All, 

I am learning to use and play around with hysys and could sure use a little help in trying to set up the transfer block function in hysys. Basically I would like to simulate, let say, suction temperature between two values say 20C to 80 C in steps of 5C over a certain period to study its affect on the polytropic head of the compressor. 

 

How could I set such a transfer block up. A step by step guidance would be much helpful. 

 

Thanks in Advance 

Ums 



#2 processengbd

processengbd

    Gold Member

  • Members
  • 128 posts

Posted 04 July 2014 - 09:23 AM

I think you can do the same thing by "case study" in hysys.




Similar Topics