|
|
Gold Member
Posted 26 July 2014 - 12:21 AM
Hello
When do we use Stainless Steel Piping in Compressor Suction?
When we do need SS piping then from where should we start the piping from KOD, from inlet strainer or just a spool at compressor suction?
I am looking at produced gas mostly methane.
regards
saqib
Gold Member
Posted 26 July 2014 - 12:49 AM
engg,
Where there would be corrosion and/or low temperature concern(s), it might SS piping material has to be used. Then let's know if such concern(s) is existed in the system you described...
Gold Member
Posted 26 July 2014 - 05:32 AM
the fluid is natural gas with H2S at 28 barg. It may drop off water in cool weathers. is this corrosive?
Gold Member
Posted 26 July 2014 - 05:38 AM
are you aware of some standard for that?
Barometric Legs Line SizingStarted by Guest_panagiotis_* , 17 Mar 2023 |
|
|
||
Co2 Removal Membranes Between Compressor StagesStarted by Guest_Sinclc_* , 26 Mar 2024 |
|
|
||
Fan Laws For Centrifugal Compressors And Varying Suction ConditionsStarted by Guest_SickPuppy0_* , 25 Jan 2023 |
|
|
||
 Answered
Centrifugal Compressor Performance Curves In Aspen HysesStarted by Guest_Rafcio_* , 14 Mar 2024 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|
Forums
Blogs
Articles
File Library
FAQ
Search
FB
