Jump to content

  2. →
  3. →


Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Hydrochloric Acid Tote Venting

Started by Subject_Name_Here, Jul 30 2014 02:50 PM
hcl hydrochloric acid hcl ventiliation ventilation tote ventilation tank ventilation mass transfer diffusion hcl difussion into air hcl and air

This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic
Share this topic:
| More

#1 Subject_Name_Here

Subject_Name_Here

    Veteran Member

  • Members
  • 30 posts

Posted 30 July 2014 - 02:50 PM

I have a tote (3.75’x3.75’ surface) full of 32% by weight HCl equipped with a teflon membrane bung and vent. The room is controlled at 1 atm and 70 F. There is a fume hood over the tote to remove HCl vapors when idle or filling. The ducting is 10” in diameter and pulls 600 CFM. How do I figure out the concentration of HCl vapor in the air ducting above the tote?

 

Any help would be appreciated.

 

Thanks


Edited by Subject_Name_Here, 30 July 2014 - 02:51 PM.

#2 Subject_Name_Here

Subject_Name_Here

    Veteran Member

  • Members
  • 30 posts

Posted 19 August 2014 - 10:29 AM

Any ideas anyone?


Back to Tank Blanketing and Venting

Similar Topics




  1. Cheresources.com Community
  2. → Tank Blanketing and Venting
  3. → Tank Blanketing and Venting
  4. Guidelines / Rules for Posting