Can any one tell me please how to do process design of wet surface air cooler .(Basic calculation)
|
Wet Surface Air Cooler Design
#1
Posted 20 August 2014 - 06:16 AM
#2
Posted 20 August 2014 - 06:41 AM
Hello ,
According to which standard you need to make the design? Asme Code or EN.. ?
#3
Posted 20 August 2014 - 10:08 AM
All you need to do is prepare a datasheet with the requirements and send it to a reputable vendor.
Bobby
#4
Posted 21 August 2014 - 01:29 AM
Dear Amoor,
According to ASME code
#5
Posted 21 August 2014 - 01:33 AM
Dear bobby.
You are right.
The information regarding WSAC we can get from vendor, but before that i want to know the basic calculation for the WSAC so that i can confirm with vendor data.
#6
Posted 21 August 2014 - 07:18 AM
WSAC vendors do not publish their confidential design correlations, they are not that stupid.
Don't take it personal, but if someone has to ask how to design a WSAC in order to verify a vendor design, then that someone is obviously not the right person to do the verification.
Just make sure that the WSAC performance guarantees supplied by the vendor are in order.
Similar Topics
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|