Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Subcooled Liquid In A Vessel


This topic has been archived. This means that you cannot reply to this topic.
2 replies to this topic
Share this topic:
| More

#1 Vegeta

Vegeta

    Gold Member

  • Members
  • 131 posts

Posted 20 September 2014 - 12:30 PM

Dears, 

 

The overhead of a column is LPG that is subcooled in an air cooled heat exchanger an then it is collected in an accumulator to be pumped back to to the column as a reflux. My question (confusing) is that if the liquid level in the accumulator is X%. what will be in the space above this level. Is it some vapor? Why don't we account for it in our calculation?

 

Regards,   



#2 PingPong

PingPong

    Gold Member

  • Members
  • 1,446 posts

Posted 21 September 2014 - 04:16 AM

Space above liquid level contains vapor. The nature of the vapor depends on the pressure control system of the column (hot vapor bypass of condensor, inert gas addition, ......whatever).



#3 sheiko

sheiko

    Gold Member

  • ChE Plus Subscriber
  • 732 posts

Posted 21 September 2014 - 09:54 PM

My question (confusing) is that if the liquid level in the accumulator is X%. what will be in the space above this level. Is it some vapor?

Hi
The vapor phase should contain at least non-condensables like C1-C1 and also C3-C4.

Edited by sheiko, 21 September 2014 - 09:55 PM.





Similar Topics