In an upstream oil sector, occasional vibration of fixed roof (cone roof) aboveground storage tank is observed, which is used as an intermediary storage for unstabilised crude. Tank vapour is recovered for condensate recovery; hence a gas dome is installed at the top of tank roof, which is connected to suction piping of centrifugal compressor. Tank vapour space pressure is approx 3" WC. Understand this type of arrangement is common in upstream industry? Can anyone share about any experience on roof vibration or cite any reference/ literature? Regards
|
No replies to this topic
Share this topic:
#1
Posted 21 September 2014 - 11:48 AM
Similar Topics
Sulphuric Acid H2So4 Storage TankStarted by Guest_TeeEng_* , 08 Apr 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|
||
Asme Code For Fiberglass Pressure Tank FeaStarted by Guest_Pheeto_* , 13 Feb 2024 |
|
|
||
Pressurized Deaerator Tank Exhaust Vent SizingStarted by Guest_zezima_* , 01 Feb 2024 |
|
|
||
Moc Selection For 98.5% H2So4 Tank Sludge CleaningStarted by Guest_lakshmi.narayanan_* , 02 Jan 2024 |
|
|