Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Self Regulating Valve Sizing


This topic has been archived. This means that you cannot reply to this topic.
5 replies to this topic
Share this topic:
| More

#1 Chemengineer112

Chemengineer112

    Junior Member

  • Members
  • 17 posts

Posted 09 February 2015 - 05:45 AM

Hi,

 

Any one please brief me about Self regulating valve.

 

Is Sizing  of Self regulating valve is same control valve  as per ISA_750101

 

Thanks



#2 samroo

samroo

    Junior Member

  • Members
  • 11 posts

Posted 09 February 2015 - 02:06 PM

As far I know

size the self regulating valve in the same way as control valve. Fill the data sheet with Min/ normal / Max process condition and title will be self valve rather than control valve.



#3 Chemengineer112

Chemengineer112

    Junior Member

  • Members
  • 17 posts

Posted 17 February 2015 - 01:54 AM

Thanks for reply and clarification but i have one query regarding self regulating  valve.

 

As self regulation valve work on some set pressure, So what is criteria for set pressure of regulating valve.



#4 fallah

fallah

    Gold Member

  • ChE Plus Subscriber
  • 4,952 posts

Posted 17 February 2015 - 02:35 AM

Hi,

 

What is criteria for set pressure of regulating valve?

 

-Process requirement and/or mechanical limitations...



#5 Chemengineer112

Chemengineer112

    Junior Member

  • Members
  • 17 posts

Posted 17 February 2015 - 06:55 AM

Dear fallah,

 

Its is set pressure of self regulating PCV. And it is  regarding to process requirement so that pressure at demand point shall not be more than require.

 

Iam preparing a datasheet for self regulating valve ,in which i required to mention set pressure (Upstream pressure) of valve.



#6 fallah

fallah

    Gold Member

  • ChE Plus Subscriber
  • 4,952 posts

Posted 17 February 2015 - 07:22 AM

Hi,

 

If the pressure at demand point shall not be more than required, then the pressure of PCV downstream should be set at prespecified value...

 

Anyway if you can upload a simple sketch of the system it might you can get better reply...






Similar Topics