Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Inlet Stream For Hysys Shortcut Column


This topic has been archived. This means that you cannot reply to this topic.
3 replies to this topic
Share this topic:
| More

#1 WADDAHELL

WADDAHELL

    Junior Member

  • Members
  • 11 posts

Posted 25 February 2015 - 08:11 AM

Hi,

 

I have a inlet going into the shortcut column which is defined from another stream.

My issue is that this particular stream conditions is always changing.

Is there anyway to have my inlet to the shortcut be updated to the latest conditions without having me to define from the stream whenever there are changes?

Thanks in advance.



#2 Zauberberg

Zauberberg

    Gold Member

  • ChE Plus Subscriber
  • 2,727 posts

Posted 25 February 2015 - 09:47 AM

If you are speaking of Hysys, you can use the "Balance" operation.



#3 WADDAHELL

WADDAHELL

    Junior Member

  • Members
  • 11 posts

Posted 26 February 2015 - 10:14 AM

If you are speaking of Hysys, you can use the "Balance" operation.

Thanks! it worked.



#4 WADDAHELL

WADDAHELL

    Junior Member

  • Members
  • 11 posts

Posted 27 February 2015 - 09:23 AM

Using HYSYS 8.4

 

Tried to export my cell in the spreadsheet to external reflux in the shortcut column.

Getting an issue where there's flickering. Seems like shortcut column keeps calculating.

Any remedy for this issue?






Similar Topics