4 replies to this topic

[mbsahg]

Hello~

 

I am trying to design from steam tracing  for vessel.

The purpose is the temperature maintenance.(about 120℃)

I know that the temperature maintenance is usually installed internal the coil.

But our client wants to install a coil on outside of vessel.

I am needing any method to calculate steam tracing length.

 

Thank you for reading message~^^

 

[breizh]

http://www.thermon.c...ignsupport.aspx

 

 

Consider this resource to support your work .

 

Good luck

 

Breizh

[mbsahg]

http://www.thermon.c...ignsupport.aspx

 

 

Consider this resource to support your work .

 

Good luck

 

Breizh

 

Thank you for your reply.

 

But, Thormon product is special item.

 

I want to use general steam tracing by tube or pipe.

 

Have a good day~^^

[breizh]

hi,

 

you should read carefully , there is a part related to steam tracing (under software)

 

Have a good day too.

Breizh

Edited by breizh, 10 March 2015 - 06:45 AM.

[mbsahg]

hi,

 

you should read carefully , there is a part related to steam tracing (under software)

 

Have a good day too.

Breizh

 

Hi

 

Thank you for your help

 

I am installed the software to supply from Thermon manufacture.(Software name: CompuTrace VT)

But the software should be selected a steam tracer of product of Thermon manufacture.

I am not able to attach a captured image file.  because i don't know  method to attach a file.

The tracer type is only 'Heet Sheet'(HS-2, HS-4, HS-8)

 

I am posted to my blog a capture file.

 

http://blog.naver.co...g1/220297271612

 

Thank you for reading message.