10 replies to this topic

[opel]

Dear Members,

 

I am looking for the following Journal paper:

 

W.Y.Wong, "PRV Sizing for Heat Exchanger Tube Rupture" Hydrocarbon Processing, Volume 71(2), February1992, pp.59-64

 

Would appreciate if anyone here kindly share the paper or send it via Email.

 

Many thanks in advance ~ Opel

[Zauberberg]

See attached.

Attached Files

•  PRV Sizing for Exchanger Tube Rupture.zip   2.22MB   685 downloads

[opel]

Many thanks Zauberberg!

[Zauberberg]

See also the attached article. It provides information on dynamic simulation usage in determining pressure buildup rates - this can aid in deciding whether a PSV can be used instead of a rupture disk. Quite interesting subject.

Attached Files

•  Evaluate Heat-Exchanger Tube Rupture Scenarios Using Dynamic Simulation.pdf   650.65KB   331 downloads

[opel]

Dear Zauberberg,

 

Thanks for the article. I was wondering if you have the following article in your library as well and can share it here:

 

 

Wing Y. Wong, "Fires, Vessels and the Pressure Relief Valve" Chemical Engineering, May 2000, pp. 84-92

 

Best regards ~ Opel

[Zauberberg]

It seems like it's your lucky day!

Attached Files

•  Fires, Vessels, and the Pressure Relief Valve CHE May 2000.pdf   865.88KB   337 downloads

[opel]

@Zauberberg: You 're right about the day -  anyway thanks a lot.

 

I 'll be back on the page, should I need more Information / literature.

 

Best regards ~ Opel

[opel]

Dear community members,

 

Would appreciate if somebody can share the following paper

 

Using DIERS two-phase equations to estimate tube rupture flowrates| Elliott, B.| Hydrocarbon Processing |08.01.2001 

 

Many thanks in advance!

 

Best regards; Opel

[Zauberberg]

Here it is - not a great copy but still readable.

Attached Files

•  Using-DIERS-Two-Phase-Equations-to-Estimate-Tube-Rupture-Flowrates.pdf   356.7KB   321 downloads

[opel]

great zauberberg and thanks alot!

[opel]

Dear Members,

 

Would you please share the following paper:

 

W.Y. Wong, "Correction to 'PRV sizing for exchanger tube rupture',"  Hydrocarbon Processing, p.44, May 1992

 

Thanks in advance ~ opel