Forums
Blogs
Articles
File Library
FAQ
Search
FB
Hi,
could anyone advice what should be the distance between tank bottom and suction bellmouth
Regards
Arun
|
|
Distance To Bellmouth
Started by akv_csl, May 16 2015 01:27 AM
4 replies to this topic
Share this topic:
#2
fallah
-
- ChE Plus Subscriber
-
- 4,951 posts
Gold Member
Posted 16 May 2015 - 02:52 AM
Arun,
As far as i know, the distance between tank bottom and suction bellmouth has to be specified per "Maximum Diameter of Bellmouth Entry" and is normally 0.8 to 1 times of that miximum diameter...
#3
oscarsender
-
- Members
-
- 39 posts
Veteran Member
Posted 16 May 2015 - 07:53 PM
akv_csl,
As per Hydraulic Institute Standards the distance of the bell mouth to sump floor is 0.3~0.5 of maximum bell mouth diameter. Also I attached an image of one of our past project for bell mouth dimension. Here, it is 0.5D (diameter is 1600mm, distance from floor is 800mm). This is for sump though.
Attached Files
-
Sump Design 2.jpg 90.88KB
7 downloads
Edited by oscarsender, 16 May 2015 - 07:55 PM.
#4
breizh
-
- Admin
-
- 6,334 posts
Gold Member
Posted 17 May 2015 - 01:51 PM
Hi ,
Additional info.
Good luck
Breizh
Additional info.
Good luck
Breizh
#5
akv_csl
-
- Members
-
- 8 posts
Brand New Member
Posted 25 May 2015 - 04:27 AM
Dear All,
Many thanks for your valuable support.
Best regards
Arun
Similar Topics
Marking The Mechanical Minimum Distance Between Fittings In P&idStarted by Guest_myself_ritesh_* , 13 May 2020 |
|
|
||
Minimum Distance Between An Attemperatorkum/desuperheater And A SteamStarted by Guest_muthukmaar_* , 27 Apr 2020 |
|
|
||
Minimum Separation Distance Between Compressor Skid And Open Oil PitStarted by Guest_james.corrobro@gmail.com_* , 09 Jan 2020 |
|
|
||
Flare Loop DistanceStarted by Guest_s_kamesh14@yahoo.co.in_* , 20 Jun 2018 |
|
|
||
Psv Bypass Line Distance Between Isolation Valve And Globe ValveStarted by Guest_chem2013_* , 12 Jan 2017 |
|
|
