Dear Sir,
we are going to design a furnance in which there will be a exothermic reaction and from reator Phosphorous pentaoxide is release, temperature of Phosphorous pentaoxide is aroung 600 to 800 degree celcius..m.o.c of furnane( close jacketed furnance) is ss 316
Height of furnance is 10 mt x inner dia is 4 mt x outer dia is 4.1 mt ( I.e jacketed is 100 mm ).having 4 nos of outer jacket at 2.5 mt each . Now i want to calculate heat load in a furnance for desiging of cooling tower load and flowrate. during process operation. furnnce temp will reach 1000 degree celcius. i want to cool 1000 degree celcius to 50 degree celcius,.
so please guide for calculation heat load in a furnace for proper design of cooling tower
Consideration :
Cooling water temperature difference is 13 degree celcius.
questionre : is it right to calculate heat load by q= mcpt or by any other method.
Jacket
approx Max Temp in 0C
Req Temp in 0C
Jacket 1
1200
50
Jacket 2
1200
50
Jacket 3
1400
50
Jacket 4
1200
50
Jacket 5
1200
50
jacketed line
800
50
bottom Plate
500
50
Edited by shamir, 12 June 2015 - 05:13 AM.