Please can anyone tell how did he determine the condensation temperature ? " Process Heat Transfer - Kern "
|
Condenser
#1
Posted 15 June 2015 - 07:09 AM
#2
Posted 15 June 2015 - 08:51 PM
Kern explains in his book the method he used The explanation follows the table shown in the book and in the above thumbnail.
#3
Posted 16 June 2015 - 03:10 AM
Mr Srfish,
But i didin't understand how he determied the condensation temperature of vapor.
regrds,
#4
Posted 16 June 2015 - 08:37 AM
Kern starts with weight % in increments of 20 of the hydrocarbon. . On this basis you calculate the amount of hydrocarbon condensed and then the partial pressures of hydrocarbon, steam and gas are calculated. Using the partial pressure of the hydrocarbon and Fig. 8 in the appendix, the condensing temperature of the hydrocarbon is determined. This is all I will say, the rest is up to you.
#5
Posted 16 June 2015 - 04:38 PM
Dear Srfish,
All right, thank you for help
regrds,
Similar Topics
How To Select Reboiler And Condenser Operating Pressures For A Mdea ReStarted by Guest_Alexis Azamar_* , 27 Mar 2024 |
|
|
||
Types Of Reboiler And CondenserStarted by Guest_refluxraider_* , 17 Mar 2024 |
|
|
||
Determining Operating Pressure For A Column Without CondenserStarted by Guest_phoroogh_* , 03 Feb 2024 |
|
|
||
Air-Cooled Condenser Symmetrical Inlet-OutletStarted by Guest_tdeb_* , 06 Nov 2023 |
|
|
||
Steam Condenser And Condensate TankStarted by Guest_J_B_* , 16 Jul 2023 |
|
|