how to fix the desing pressure of the pipe? Is there any exact formula to calculate the design pressure of the pipes. kindly explain.
|
Design Pressure Of The Pipe
#1
Posted 07 July 2015 - 11:12 PM
#2
Posted 08 July 2015 - 02:20 AM
Design pressure of pipe is generally taken as centrifugal pump shutoff head or the safety valve set pressure.
#3
Posted 08 July 2015 - 03:32 AM
Are you asking about selection or calculation of the design pressure/MAWP? If you are interested in calculation, look at the piping code your project adheres to - usually based on ASME B31.3 if process piping is in question.
#4
Posted 08 July 2015 - 04:29 AM
krishnamurthy,
As zauberberg mentioned you should refer to relevant piping code; for example in ASME B31.3 the design pressure, in brief, is a pressure value which with coincident temperature will lead to highest pipe thickness...
#5
Posted 11 July 2015 - 07:57 PM
how to fix the desing pressure of the pipe? Is there any exact formula to calculate the design pressure of the pipes. kindly explain.
from my experience,
generally, process design pressure is maximum possible operating pressure + 1 barg OR maximum possible operating pressure x 110%.
Edited by farid.k, 11 July 2015 - 07:59 PM.
Similar Topics
Answered
Steam Pressure Requirements For Limpet Batch ReactorStarted by Guest_golegolegole_* , 10 Apr 2024 |
|
|
||
Valves On Low Pressure Steam ServiceStarted by Guest_Ali4269278331_* , 15 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|