Hi all,
I have two questions regarding noise calculation of a safety valve;
First question;
On the sizing sheet of VALVESTAR (Leser) I see that noise is calculated based on API 520 (actually it is based on 521). the calculation procedure is for open vent to ATM or flare tip. But, if the outlet of the PSV is connected to a closed system it (pipe at outlet) will have some noise reduction effect. Does anybody know how to calculate this noise reduction effect?
Second question;
is there any short cut calculation/estimation to convert Noise Pressure Level (in dB) to A-weighted Noise Pressure Level?
thanks in advance,
ARM