Dear All,
Kindly suggest what will be discharge head of the pump for pump manufacturer, according to the attached drawing.
Regards.
Attached Files
Edited by NBD3000, 20 August 2015 - 04:39 AM.
|
Posted 20 August 2015 - 04:31 AM
Dear All,
Kindly suggest what will be discharge head of the pump for pump manufacturer, according to the attached drawing.
Regards.
Edited by NBD3000, 20 August 2015 - 04:39 AM.
Posted 20 August 2015 - 04:48 AM
Water level will be maintained according to sump level but to reach the water back to tank require pump.
My question is will the pump require 30m head or 10m head or other???
Posted 20 August 2015 - 04:52 AM
Discharge head will be discharge side elevation from the center line of the pump. In your case it is (5+x+Line loss) m or (10+x) m. x is length of small vertical line above pump.
Posted 21 August 2015 - 01:47 PM
Time Required To Heat Up A Fluid In A VesselStarted by Guest_panagiotis_* , 24 Jan 2023 |
|
|
||
Piping Design_ Pump PipelineStarted by Guest_anh.phungthai@boydensvn_* , 29 Feb 2024 |
|
|
||
Design Considerations For Cryogenic Submersible PumpStarted by Guest_heydari_* , 04 Feb 2024 |
|
|
||
Variable Speed Pump CurvesStarted by Guest_panagiotis_* , 27 Jan 2024 |
|
|
||
Pump-Continuous Flow After TripStarted by Guest_stu_* , 28 Jan 2024 |
|
|