No replies to this topic

[ASHITA123]

Dears,

I use pipesim in gathering 4 sources  with different pressures ,so use multistage compressor to reach required pressure as attached file.

The case not solve due to Fewer boundary conditions must be supplied.

I entered for each source pressure & flow, and entered pressure for liquid from each 2 phase separator.

 

 

When i remove flow rates of each field and set the total flow at the end [ to no of P&Q required equal to P&Q supplied], it solve but with wrong distribution between sources. 

  

Kindly advice how solve the case.

Attached Files

•  Gas gathering system.docx   163.69KB   30 downloads