4 replies to this topic

[FP72]

Dear all,

I'm using Hysys v8.6 and the Stream Reporter file provided by AspenTech.

The problem is that it doesn't work properly: some of the properties are not reported at all.

The error is : "Error whe reporting property".

Properties like Compressibility, Cp\Cv, Heat Flow, Actual Gas Flow etc are not reported at all.

I've asked Technical Support some tips to solve the issue but up to now they failed.

You know the importance of the stream reporter to make H&MB.

Does any one know how to solve the problem?

 

Thank you so much

 

 

[Bobby Strain]

You can always write your own.

 

Bobby

[latexman]

I do not know if this is the problem, but on a different software I got similar results on those properties that were NOT used in the calculations.  As soon as I made the software do some calculations that used all the properties, it reported all the properties.  Let us know if this works for you.

[Bobby Strain]

You can try the WorkbookDump instead.

 

Bobby

[ahmadikh]

 Recently, I used the V8.6 reporter without any issues. Did you try to choose the properties properly in the first tab of the reporter Excel file? Maybe it is a good idea to take a snapshot from that tab and upload it here. Also, seems that what latexman suggests may help the issue.

 

Best,

Milad