Good day to all!
I am a mechanical engineer, but I have a couple of years working in the department of processes of my company, we now have a project to design a GUN BARREL tank, but unfortunately we have some doubts as regards the calculation of oil distributor (which is located at the discharge of the degasser, some call it "spider"), so I turn to you asking if you could help me giving me some references on how to calculate this in regard to the calculation of the spindle, feeder roads and diameter discharge ports.
thanks for your help and feed back!.
|
1 reply to this topic
Share this topic:
Similar Topics
Sulphuric Acid H2So4 Storage TankStarted by Guest_TeeEng_* , 08 Apr 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|
||
Asme Code For Fiberglass Pressure Tank FeaStarted by Guest_Pheeto_* , 13 Feb 2024 |
|
|
||
Pressurized Deaerator Tank Exhaust Vent SizingStarted by Guest_zezima_* , 01 Feb 2024 |
|
|
||
Moc Selection For 98.5% H2So4 Tank Sludge CleaningStarted by Guest_lakshmi.narayanan_* , 02 Jan 2024 |
|
|