|
#1
Posted 24 January 2016 - 09:32 AM
Do you know any standard about installation pressure gauge in pump suction?
#2
Posted 24 January 2016 - 11:39 AM
Mr. Rahimzadeh,
You may find your query in "Hydraulic Institute Standards"...
#3
Posted 24 January 2016 - 06:13 PM
Hi Mr Rahimzadeh ,
Consider the document attached .
Hope this helps.
Breizh
#4
Posted 24 January 2016 - 09:02 PM
i did refer to typical process standard, it should be located before the pump suction inlet nozzle or before reducer (if has reducer).
#5
Posted 24 January 2016 - 11:03 PM
Pressure gauge at the pump suction is generally installed when the pump fluid is at saturated conditions. The gauge will help the operator to avoid cavitation of the pump.
Similar Topics
Vacuum Pump Power EquationStarted by Guest_hysyshunter_* , 22 Apr 2024 |
|
|
||
Heavy Crude PumpStarted by Guest_Rahimzadeh_* , 13 Apr 2024 |
|
|
||
Pump Sizing ConsiderationsStarted by Guest_panagiotis_* , 07 Apr 2024 |
|
|
||
Fan Laws For Centrifugal Compressors And Varying Suction ConditionsStarted by Guest_SickPuppy0_* , 25 Jan 2023 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|