5 replies to this topic

[bhdrsc]

We have the steam conductivity analyzer before the steam turbine and the results can be seen on DCS screen. Our aim is to make cross-check the conductivity analyzer. It is very hard to make conductivity analysis in laboratory. 

In order to cross check conductivity analyzer, what can we do?

[P.K.Rao]

Digital conductivity meters are available with many manufacturers. You an find on web. You can use any one.

[bhdrsc]

There are not same results between the automatic analyzer and digital conductivity meter. How can we check the automatic analyzer instead of digital conductivity meter? 

[breizh]

Hi ,

Can you check with your vendor for calibration ? Probably like any analyser a verification/calibration plan is required .

Good Luck,

Breizh

[P.K.Rao]

Rerer to Betz Dearborn Hand Book Chapter 52 for conductivity calibrations. You can get a standard resistor from the vendor also. Lot of information is available on web. Type "standard conductivity solutions" in google search box and see.

[breizh]

To add to P.K.Rao , i will suggest you to consider the resource attached:

http://www.gewater.c...measurement.jsp

 

Good luck 

 

Breizh