Edited by emmanuelv2012, 22 May 2016 - 02:37 AM.
|
Starting My Plant Design
#1
Posted 22 May 2016 - 02:33 AM
#2
Posted 22 May 2016 - 05:28 PM
You're a student and, as usual, your writing is sloppy and difficult to understand.
The first thing you should learn is that you will never be seen or respected as a serious engineer if you continue to communicate is such a bad manner when you graduate.
I could write you a long book on what you should do to prepare for doing a plant design, but I haven't the time at present. However, some time ago, I worked on a document to guide young engineers in preparing engineering process calculations. Some of the features are essentially the same and applicable to your need, so I'll pass it on to you and any other student that may see some help in it.
Regards,
Preparing Engineering Calculations.docx 21.79KB 71 downloads
#3
Posted 23 May 2016 - 05:10 AM
#4
Posted 23 May 2016 - 10:58 AM
Your current courses are preparing you for the next year. So focus your effort on your current classes.
Bobby
#5
Posted 24 May 2016 - 04:40 AM
-Victor Emmauel
#6
Posted 26 May 2016 - 10:33 PM
Thanks at Mr Bobby am actually on internship now (that is industrial training). I would be entering final year next year and i would be carrying out my project and plant design Tasks, I just needed some guides(that is knowing what to study now that would make the plant design work easier when the time comes) that i can use to prepare my self for the plant design work. thanks all the same.
-Victor Emmauel
Hi
Actualy you are unclear. Try to start from this book or give us more information.
#7
Posted 27 May 2016 - 04:10 AM
Similar Topics
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , Today, 01:43 AM |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|
||
Sulfuric Acid PlantStarted by Guest_Kartik54_* , 16 Mar 2024 |
|
|