Hello to all,
I am a new process engineer in industr. My company is basically equipment manufacturing and I am the only process engineer here. So thats why needed help. i am working on new project of Lpg storage installation. This include lpg from ship to tank to truck loading.
I have 2 questions right now as follows
1) i have gone through some old project in which BARREL PUMP is mentioned. Barrel pump come on what classificaton?? can I use any other pump??
2) As on utility portion client told us to use hydraulic valve so that Instrument air will not be needed in utilty..
I dont know what that mean??
3) client is asking that insulation of pump suction line is required or not. I told them insulation is not needed because i designed that way. i use the criteria for line sizing of pump suction are:
Velocity: 0.5 - 1.2 m/sec
press drop: less than 0.1 kg/cm2 ( per 100m)
I just wanted to know that am i right here???
some data:
Capacity: 5000MT ( two spherical tank of capacity 2500MT
pump capacity: 120 m3/hr
location : Nigeria
If any other data required i can give.
with regards
Navneet
Edited by navneet2109, 01 June 2016 - 12:54 AM.