Dear All,
Does anyone have experience with damage on vane pack due high gas velocity?
Is there a recommendation in terms of gas velocity to avoid damage on vane pack?.
In this case, inadequate liquid removal is not a problem because there is other separator in series with a adequate size of vane pack.
Thanks
|
Damage On Separator Vane Pack Due High Gas Velocity
Started by Elí, Nov 03 2016 04:53 PM
separator vane pack
3 replies to this topic
Share this topic:
#1
Posted 03 November 2016 - 04:53 PM
#2
Posted 03 November 2016 - 08:24 PM
Do you have evidence that the vane pack is damaged?
Bobby
#3
Posted 13 November 2016 - 11:29 AM
Bobby
My separator have liquid carry over problem, vane packed inside separator, high gas velocity is the problem? and if gas high velocity the problem then how i can mitigate it.
#4
Posted 13 November 2016 - 02:29 PM
You can find an application on my website to rate your separator. Along with vane supplier correlations.
Bobby
Similar Topics
Flow Switch High RangeStarted by Guest_Lyne_* , 11 Apr 2024 |
|
|
||
Fired Heaters/ Burners/ Flue VelocityStarted by Guest_Lyne_* , 15 Mar 2024 |
|
|
||
High Pressure Condensate Recovery To Low Pressure DeaeratorStarted by Guest_hd_1982_* , 16 Feb 2024 |
|
|
||
Separator Sizing And Selection, And What Is Slug?Started by Guest_Doneisbetterthenperfect_* , 26 Jan 2024 |
|
|
||
Aspen Edr, Shell And Tube, Velocity In TubesStarted by Guest_Mehdi534_* , 09 Jan 2024 |
|
|