Edited by johnromero1964, 25 November 2016 - 12:40 PM.
|
1 reply to this topic
Share this topic:
#1
Posted 25 November 2016 - 12:34 PM
I am doing a simulation in HTRI type rating, the program is in its results indicates that both temperatures output are greater than the temperatures of entry. This is not logical because the fluid with a higher temperature to the entry should have a lower temperature to the output. Someone can help me about it.
#2
Posted 27 November 2016 - 11:40 PM
Check with process engineer, if not, the process lead. Maybe its a careless input.
Similar Topics
Time Required To Heat Up A Fluid In A VesselStarted by Guest_panagiotis_* , 24 Jan 2023 |
|
|
||
Plate Fin Heat ExchangerStarted by Guest_shazzad1613_* , 23 Mar 2024 |
|
|
||
Duplication Of Psv And Flow Rate For Exchanger Tube Rupture ScenarioStarted by Guest_Platonicus_* , 11 Mar 2024 |
|
|
||
Heat Exchanger Temperature CrossStarted by Guest_kaidlut_* , 20 Dec 2022 |
|
|
||
Temperature Cross Heat ExchangerStarted by Guest_Priolo_* , 12 Aug 2019 |
|
|