|
Compressor Suction Temperature
#1
Posted 29 November 2016 - 12:42 PM
I have a question please. I deal with a gas its dew point -25 c and hydrate formation at suction pressure is -18 c.
The question is it possible to enter the gas at -10 c to the compressor, because there is no possibiliy to form hydrate or condensate at this temperature and pressure.
Your quick response is highly appreciated.
#2
Posted 29 November 2016 - 01:10 PM
Hi,
The rule of thumb is to operate natural gas systems at least 10 deg C above the hydrate formation temperature. If that is not possible, you can inject a hydrate inhibitor such as methanol or MEG upstream of the compressor suction scrubber . Hydrate inhibitors act to depress the hydrate formation temperature thus allowing operation at low temperatures.
Regards,
Ankur.
#3
Posted 29 November 2016 - 02:10 PM
Regards,
#4
Posted 01 December 2016 - 06:20 PM
Hi
Make sure,after compression the gas doesn't get cooled off much.It must remain atleast 10 Deg C above the hydrate formation temperature.
Because after compression,hydrate formation temp will also increase with the increase in discharge pressure.
Regards
Aditya
Similar Topics
Co2 Removal Membranes Between Compressor StagesStarted by Guest_Sinclc_* , 26 Mar 2024 |
|
|
||
Fan Laws For Centrifugal Compressors And Varying Suction ConditionsStarted by Guest_SickPuppy0_* , 25 Jan 2023 |
|
|
||
Answered
Centrifugal Compressor Performance Curves In Aspen HysesStarted by Guest_Rafcio_* , 14 Mar 2024 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|
||
Heat Exchanger Temperature CrossStarted by Guest_kaidlut_* , 20 Dec 2022 |
|
|