Good day to all !
Please , does anybody work or knows about RTO (regenerative thermal oxidizers) and could exchange a little of knowledge with me?
I would like to compare RTO natural gas consumption, burners power and everything is possible.
I have a 83000 Nm3/h stream with air + voc (99,5%air) and it will be oxidized in an RTO at 800 Celsius.
My burner (only one) is 2.500.000 Kcal/h.
Ceramic media in two chambers will recovery 97% of heat.
obs: all my numbers are calculated and not in use at this moment (still in project phase)
My Natural Gas consumption is about 140 m3/h
Thanks to all
Max