Dear
For AES type (R-Class) S&T heat exchanger, how to calculate velocity at the inlet of the shell nozzle? and is there any standard for maximum velocity in the shell side and tube side to maintain?
Thank you,
Regards,
Sameer
|
Posted 06 February 2017 - 07:44 AM
Dear
For AES type (R-Class) S&T heat exchanger, how to calculate velocity at the inlet of the shell nozzle? and is there any standard for maximum velocity in the shell side and tube side to maintain?
Thank you,
Regards,
Sameer
Posted 06 February 2017 - 12:36 PM
You can find equations at www.gulleyassociates in the engineering tips section. Look for "Calculate shell nozzle pressure drop". It will give you equations for the shell entrance or exit area. From this you can calculate the velocity at the inlet of the shell nozzle.
For maximum velocities you can search this website for answers.
Posted 07 February 2017 - 11:15 PM
Dear Sir,
Thank you so much and indeed it is very helpful website.
Thank you
Best Regards,
Sameer
Overall Heat Transfer CoefficientStarted by Guest_T_bag_* , 16 Apr 2024 |
|
|
||
Specific Heat DatabaseStarted by Guest_bckesim_* , 08 Apr 2024 |
|
|
||
Time Required To Heat Up A Fluid In A VesselStarted by Guest_panagiotis_* , 24 Jan 2023 |
|
|
||
Plate Fin Heat ExchangerStarted by Guest_shazzad1613_* , 23 Mar 2024 |
|
|
||
Duplication Of Psv And Flow Rate For Exchanger Tube Rupture ScenarioStarted by Guest_Platonicus_* , 11 Mar 2024 |
|
|