Hi,
Can anyone tell me how i can use HYSYS to model a FILTER. Seawater is going to pass through the filter.
|
Using Hysys To Design A Filter
Started by asade abiodun, Feb 20 2007 10:44 AM
2 replies to this topic
Share this topic:
#1
Posted 20 February 2007 - 10:44 AM
#2
Posted 20 February 2007 - 06:18 PM
asade,
Maybe I'm too much from "the old school", but I can't imagine there being a reason for simulating a filter. There's nothing to model beside pressure drop. You could use a valve or pipe section to do that.
Doug
Maybe I'm too much from "the old school", but I can't imagine there being a reason for simulating a filter. There's nothing to model beside pressure drop. You could use a valve or pipe section to do that.
Doug
#3
Posted 21 February 2007 - 02:50 AM
DJACK,
Thanks for the information.
Thanks for the information.
Similar Topics
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
How To Find K-Values Of A Hydrocarbon Mixture On Aspen Hysys?Started by Guest_Alexis Azamar_* , 08 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|
||
Extension Reaction Kinetic In HysysStarted by Guest_Ulbert Zsolt_* , 29 Mar 2024 |
|
|