Dear all,
Can you please assist me in designing the floating roof tank design for a particular capacity.And slso what are the nozzles to be considered and what sizes of nozzles to be considered.-If any one have the clear diagram of ideal FR tank it will help me a lot,sine i am a trainee.
Thank you..
Regards,
Marimuthu.A
|
Floating Roof Tank Design
Started by Marimuthu A, Feb 24 2007 04:02 AM
1 reply to this topic
Share this topic:
#1
Posted 24 February 2007 - 04:02 AM
#2
Posted 01 March 2007 - 11:29 AM
I think that you might have better luck getting replies if you post your question in a more appropriate place. This is the Tank Blanketing section.
Also your question is so general that it would require a book to answer the questions. You seem to be asking for someone to design the vessel for you as you have no experience at all in the subject. This is a large, serious undertaking that you have and must be done with a firm foundation in the subject.
Best of luck.
Also your question is so general that it would require a book to answer the questions. You seem to be asking for someone to design the vessel for you as you have no experience at all in the subject. This is a large, serious undertaking that you have and must be done with a firm foundation in the subject.
Best of luck.
Similar Topics
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Sulphuric Acid H2So4 Storage TankStarted by Guest_TeeEng_* , 08 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|