I am trying to prepare ethanol. ethylene and water is reacted in stoichiometric reactor with 90% conversion of ethylene.
so the product stream has small % of unreacted ethylene.
i want to seperate this ethylene and ethanol-water stream using flash column with three outputs.
but no separation on the basis of specific gravity is getting in bottom two output streams.
The output stream on right side of the column is showing zero flow rate.
when i looked in help they referred to select LLV MODEL AND WATER IMMISCIBLE which i did in the Kvalues menu. still there is no change in the result i get.
can anyone help me with this.....
|
Chemcad Simulation Flash Column
Started by GECian, Jun 08 2007 07:03 AM
No replies to this topic
Share this topic:
#1
Posted 08 June 2007 - 07:03 AM
Similar Topics
Flash Steam Vessel SizingStarted by Guest_JohnFields343_* , Today, 12:03 PM |
|
|
||
Diked Area Around Distillation ColumnStarted by Guest_hysyshunter_* , 15 Apr 2024 |
|
|
||
Distillation Column Decommissioning ChecklistStarted by Guest_m.bhut_* , 08 Apr 2024 |
|
|
||
Ammonium Sulfate Process SimulationStarted by Guest_amir55261_* , 06 Apr 2024 |
|
|
||
Olga And Aspen Simulation SoftwareStarted by Guest_CHEMSTRONG_* , 27 Mar 2024 |
|
|