What are the codes/ standards to be followed for design of atmospherically vented water storage tanks ? I presume API 650 is for oil storage
|
Codes For Design Of Atmospheric Tanks
Started by ayan_dg, Jul 22 2008 04:16 AM
2 replies to this topic
Share this topic:
#1
Posted 22 July 2008 - 04:16 AM
#2
Posted 22 July 2008 - 06:05 AM
Ayan:
Refer to my response to your other query in this Forum regarding drains for a very large "water" tank.
You fail to give your readers ALL of the basic data and scope of work. You can't expect reasonably intelligent and coherent responses when you starve us of basic data.
Do your local leg work in seeking and finding what are YOUR local requirements and regulations regarding whatever type of water you are dealing with.
Refer to my response to your other query in this Forum regarding drains for a very large "water" tank.
You fail to give your readers ALL of the basic data and scope of work. You can't expect reasonably intelligent and coherent responses when you starve us of basic data.
Do your local leg work in seeking and finding what are YOUR local requirements and regulations regarding whatever type of water you are dealing with.
#3
Posted 22 July 2008 - 07:33 AM
In addition to Art's comments, I believe that you are posting in the wrong forum. I suggest you look at http://www.awwa.org/
(Art, good morning. We haven't seen you around for awhile.)
(Art, good morning. We haven't seen you around for awhile.)
Similar Topics
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|
||
Co2 Degasser Design ParametersStarted by Guest_AnnaV_* , 26 Feb 2024 |
|
|
||
Determination Of The Number Of Foam Chambers For Storage TanksStarted by Guest_AnbIran_* , 15 Feb 2024 |
|
|
||
Design Of A Psa Unit For Undergraduate Design ProjectStarted by Guest_LMorgan14_* , 04 May 2021 |
|
|