Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Open Steam Distillation Of Oil


This topic has been archived. This means that you cannot reply to this topic.
2 replies to this topic
Share this topic:
| More

#1 olrock

olrock

    Brand New Member

  • Members
  • 6 posts

Posted 17 July 2009 - 04:47 AM

is it possible to apply open steam distillation in deodorization and discoloration of oil and the source of steam is geothermal plant here in the Philippines?
hope you can help me..tanx!!!

#2 Qalander (Chem)

Qalander (Chem)

    Gold Member

  • ChE Plus Subscriber
  • 829 posts

Posted 17 July 2009 - 06:32 AM

QUOTE (olrock @ Jul 17 2009, 02:47 PM) <{POST_SNAPBACK}>
is it possible to apply open steam distillation in deodorization and discoloration of oil and the source of steam is geothermal plant here in the Philippines?
hope you can help me..tanx!!!


Dear Kindly elaborate further details of your query;Especially

Is the Scope of work limited to stripping off some undesired part of an oil
Employing live direct steam heating and agitating the oil;

Oil is
vegetable?,
Animal? or some other
bio-produced?
or mineral?)

What are the un-desirables to be removed? and
up to what extent?
Removed material to be disposed where and How?

What quality of product is essential and how will that be ensured/verified?

What is the quality of distillation affecting live direct steam?

Does this contain any contaminants which may find their way into Oil product stream?

Is there any possibility of some chemical reaction to occur or not while intimate mixing/ agitation takes place?

Will the condensed water droplets;if produced may or may not hamper the product Oil?

The above are few of the data missing,i believe.May show way forward.

#3 olrock

olrock

    Brand New Member

  • Members
  • 6 posts

Posted 22 July 2009 - 02:56 AM

The oil to be used is Pili nut (Canarium ovatum) oil and to be deodorized and to be used in spas for purposes like aromatherapy(so it won't have to be of the highest quality unlike those oils used in food and pharamaceutical industries).

Analyses conducted at DOST V laboratory showed that the oil produced by the process has a very low free fatty acid (FFA) content of 0.06% and moisture content (MC) of only 0.04%, which favors a longer shelf life of the product.

Unfortunately, I don't have the data of the steam to be used in the process.

Are there any possible ways of deodorizing the said product without using distillation?Is absorption a possible way?

I suggested esterification process since, according to references i have read that deodorization process lowers the free fatty acid content of the product but I really don't know if it will be applicable in this situation.

Thanks and I'm hoping you can give me a lead on this project.

GOD BLESS!





Similar Topics