Dear Friends,
I am working on removal (adsorption) of heavymetal Cr(III) from its aqueous solution using natural granular adsorbent in a fixed bed column (up flow mode). I have following queries regarding further work,
1) What will be better for scale up operation, To use single column of higher diameter and length or to use small columns i series connected to each other.????
2) I guess if I used column in series, I might requires peristaltic pump before each column to pass effluent from one column to another. so overall cost may increase due to m ore no. of pumps.
I am operating column in up flow mode.
plz guide me!!!!!!!!!!!!!!
|
Fixed Bed Column: Single Long Column Or Series Of Short Columns...?
Started by umesh2329, Aug 07 2009 09:48 PM
No replies to this topic
Share this topic:
#1
Posted 07 August 2009 - 09:48 PM
Similar Topics
Diked Area Around Distillation ColumnStarted by Guest_hysyshunter_* , 15 Apr 2024 |
|
|
||
Distillation Column Decommissioning ChecklistStarted by Guest_m.bhut_* , 08 Apr 2024 |
|
|
||
Distillation Column DiameterStarted by Guest_refluxraider_* , 12 Mar 2024 |
|
|
||
Diameters Of A Structured Packing Distillation Column With No VapourStarted by Guest_hysyshunter_* , 07 Mar 2024 |
|
|
||
Distillation Column With TraysStarted by Guest_wait_what_* , 13 Feb 2024 |
|
|