Dears:
we want to know caustic tank internal need coating or not?
|
Posted 02 February 2019 - 10:04 AM
Dears:
we want to know caustic tank internal need coating or not?
Posted 02 February 2019 - 07:13 PM
Hi ,
My experience with caustic soda has "always" been Carbon steel for NaoH 32% and 48%. Pay extremely attention to the quality of the welds and the material used for welding (rods) . More details in the pamphlet attached .
The only exception ,with steel lined was because issue with coloration of the final product .
Insulation and tracing need to be considered .
Good luck.
Breizh
Edited by breizh, 03 February 2019 - 09:29 PM.
Posted 04 February 2019 - 10:35 PM
Posted 05 February 2019 - 01:19 AM
Hello,
Hope these two pages will help you.
Regards,
Nikolai
Edited by Nikolai T, 05 February 2019 - 01:20 AM.
Posted 06 February 2019 - 01:17 PM
Thanks ALL
Sulphuric Acid H2So4 Storage TankStarted by Guest_TeeEng_* , 08 Apr 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|
||
Asme Code For Fiberglass Pressure Tank FeaStarted by Guest_Pheeto_* , 13 Feb 2024 |
|
|
||
Pressurized Deaerator Tank Exhaust Vent SizingStarted by Guest_zezima_* , 01 Feb 2024 |
|
|
||
Moc Selection For 98.5% H2So4 Tank Sludge CleaningStarted by Guest_lakshmi.narayanan_* , 02 Jan 2024 |
|
|