HI there,
I want to calculate time required for venting all hydrogen gas from hydrogenator which is operated under 4Kg/cm2 through 40 mm vent.
I tried through torricelli equation but result found abnormal.
|
Posted 07 June 2019 - 01:46 AM
HI there,
I want to calculate time required for venting all hydrogen gas from hydrogenator which is operated under 4Kg/cm2 through 40 mm vent.
I tried through torricelli equation but result found abnormal.
Posted 07 June 2019 - 02:50 AM
hi ,
Please consider reading this document to support your work .
Monitoring the effectiveness of the process is key .
good luck
Breizh
Edited by breizh, 07 June 2019 - 08:36 AM.
Posted 07 June 2019 - 07:58 AM
Torriceli is for liquids.
Is there a restriction orifice? Use choked flow.
Time Required To Heat Up A Fluid In A VesselStarted by Guest_panagiotis_* , 24 Jan 2023 |
|
|
||
Vent Sizing Using GooseneckStarted by Guest_mychemicalromance0425_* , 23 Feb 2024 |
|
|
||
Pressurized Deaerator Tank Exhaust Vent SizingStarted by Guest_zezima_* , 01 Feb 2024 |
|
|
||
Gas Seal In Hydrogen Vent StackStarted by Guest_Afshin445_* , 27 Dec 2023 |
|
|
||
Controlled Type Blowdown Through Vent Stack, Reach Mach 1Started by Guest_x127127@hotmail.com_* , 16 Dec 2017 |
|
|