Hi to all,
If no valid liquid case exist in flare, i consider liquid flow as mentioned in API, 2 wt % of maximum gas flow.
is this good practice to size either vertical or horizontal KOD?
|
Posted 01 November 2019 - 03:42 AM
Hi to all,
If no valid liquid case exist in flare, i consider liquid flow as mentioned in API, 2 wt % of maximum gas flow.
is this good practice to size either vertical or horizontal KOD?
Posted 01 November 2019 - 08:18 AM Best Answer
Hi ,
Consider the resource attached.
Good luck
Breizh
Posted 03 November 2019 - 09:42 PM
Hi ,
To add to my previous post another document .
good luck.
Breizh
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Water Seal DrumStarted by Guest_Ali4269278331_* , 05 Apr 2024 |
|
|
||
Handling The Limited Capacity Of Flare SystemStarted by Guest__1angelia23_* , 05 Apr 2024 |
|
|
||
Sizing Of Vertical/horizontal Flash DrumStarted by Guest_Mohammad3799_* , 10 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|