Dear members
I am working on crude oil topping unit project to increase the Flash point of the Crude from 40 DEG C TO 60 DEG C in flash vessel. please find attached Process flow diagram for the unit along with stream properties are mentioned there. I had also attached Product data sheet for ready reference.
in this process , waste gases ( Non condensing gases ) will be Generated which needs further treatment. I discussed with end user regarding this. end user instructed that consider suitable measure for the Treatment of the gases in the design except flaring. ( Flaring is not allowed due to local authority regulations)
I am requesting to help me in this matter. what are the Other Possible ways/ type fort he Treatment of the waste gases other than flaring.
if you require any other Details Please let me know.
regards
vaibhav