|
|
0
Junior Member
Posted 31 August 2021 - 01:35 AM
As per operating company's code, maximum allowable pressure drop per length is limited. (for example 3.5 bar/km)
Wouldn't it be a problem if the pressure required by the demanding process is satisfied?
If the material-related velocity limit(erosion, corrosion, noise) is not exceeded and the pressure of the demanding process is satisfied, is it okay to exceed the pressure drop standard?
Edited by Younghun Kim, 31 August 2021 - 04:30 AM.
Gold Member
Posted 31 August 2021 - 02:51 AM Best Answer
Hi ,
If this is a client's requirement you need to follow it .It's the one who pays the bill .
Note : a standard is just a standard not a contract.
my view.
Breizh
Valves On Low Pressure Steam ServiceStarted by Guest_Ali4269278331_* , 15 Apr 2024 |
|
|
||
Caloric Temperature CalculationStarted by Guest_bckesim_* , 10 Apr 2024 |
|
|
||
 Answered
Steam Pressure Requirements For Limpet Batch ReactorStarted by Guest_golegolegole_* , 10 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Rh CalculationStarted by Guest_bckesim_* , 03 Apr 2024 |
|
|
Forums
Blogs
Articles
File Library
FAQ
Search
FB
