Hi all,
I heard one saying that when sizing flare size, the venting flow rate should be the sum of all PSVs in one fire zone.
Is this right? and where this requirement comes from ? API?
|
Posted 01 June 2023 - 07:51 AM
Hi all,
I heard one saying that when sizing flare size, the venting flow rate should be the sum of all PSVs in one fire zone.
Is this right? and where this requirement comes from ? API?
Posted 01 June 2023 - 08:58 AM Best Answer
Hi,
Consider this thread:
https://www.eng-tips....cfm?qid=341580
Hope this is putting you in the right direction.
Breizh
Posted 01 June 2023 - 10:51 AM
Why have you shown the fire zone as a circle?
Bobby
Posted 01 June 2023 - 06:15 PM
Hi,
Consider this thread:
https://www.eng-tips....cfm?qid=341580
Hope this is putting you in the right direction.
Breizh
Thanks, it helps a lot.
Handling The Limited Capacity Of Flare SystemStarted by Guest__1angelia23_* , 05 Apr 2024 |
|
|
||
Psv Fire Case Relief Load CalculationStarted by Guest_mahmooddalvi09_* , 21 Feb 2024 |
|
|
||
Back Pressure Of Elevated Flare Vs Ground FlareStarted by Guest_Sid__* , 04 Jan 2024 |
|
|
||
Floating Closed Drain Drum With FlareStarted by Guest_Falah_* , 26 Jan 2024 |
|
|
||
Fire Ball DistinguisherStarted by Guest_Rahimzadeh_* , 22 Dec 2023 |
|
|