hi every one, i have 8.8 version and now i simulate a fired heater system in dynamic modebut i get some probleme to fix the flow and the pressur (streams and air/fuel) despite i use the PID controller?
what my mistake
flow to fix :75 m3
prssur:16 bars
temperature : 360 °C
i don't need that you solve me the simulation but told where is the fault.
NB: i don't know why i can't upload the file in .hsc (hysys document)
THANKS.
Attached Files
Edited by titim, 04 May 2016 - 03:11 PM.