Dear Experts,
Can anyone share the design of helical coil heat exchanger calculation.
|
Posted 05 April 2017 - 06:53 AM
Dear Experts,
Can anyone share the design of helical coil heat exchanger calculation.
Posted 05 April 2017 - 09:51 AM
Is the coil in a vessel that has agitation?
Posted 06 April 2017 - 09:13 AM
Sakthi Vel,
You can search in this forum "Helical Coil design", you will found information about your question.
Napo.
Posted 06 April 2017 - 11:26 AM
Sakthi Vel,
SRfish brings out an important point before going any further.
Unfortunately the term “spiral” is used frequently to mean various forms of pipe or tubing coils. Sometimes what is meant is the term “helix”. Is that your case? You have to be SPECIFIC in describing what you mean or have. Otherwise, we waste a lot of valuable time and effort on the part if our members. Please refer to the attached documents to see the difference between two types of heat exchanger tubing configurations.
I have designed and built both the helix and spiral type of heat exchanger in the field, using them in relatively small size applications (<50 ft2). I’ve used them as preheaters, gas-to-gas exchangers, compressor intercoolers, and sample coolers. I have uploaded a lot of material and literature in our Forums through the years and you can find it using our SEARCH engine. I can upload information in this thread, but you must be specific about your application. For example, answer SRfish’s question regarding whether the coil is in a tub or vat and is agitated. These details all make a big difference in how your query is answered.
Await your input and response.
Helix or Spiral.docx 81.15KB 612 downloads
Graham Heliflow Sizing.pdf 2.08MB 826 downloads
Time Required To Heat Up A Fluid In A VesselStarted by Guest_panagiotis_* , 24 Jan 2023 |
|
|
||
Plate Fin Heat ExchangerStarted by Guest_shazzad1613_* , 23 Mar 2024 |
|
|
||
Duplication Of Psv And Flow Rate For Exchanger Tube Rupture ScenarioStarted by Guest_Platonicus_* , 11 Mar 2024 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|