|
Variation Of Efficiency Of Condenser
#1
Posted 13 April 2017 - 11:06 AM
#2
Posted 13 April 2017 - 11:11 AM
#3
Posted 13 April 2017 - 02:51 PM
The material in the dryer is desiccant. This does not sound like a real application. What is your interest?
Bobby
#4
Posted 13 April 2017 - 03:44 PM
RSK:
Like Bobby Strain, I am also at a loss as to what you are inquiring about and your written description of what I believe is an adsorption drying process is difficult to understand.
Kindly refer to the attached flow diagram of an adsorption drying system I've designed and built in the past for CO2. I've also used this same process for air, nitrogen, oxygen, natural gas, and nitrous oxide. I know it works and it has met all specified design results - with a product dew point as low as -90 oF. I've designed other configurations, but I think this is something like what you are trying to describe.
If your process configuration is different from mine, draw a correct version of yours and submit it in this thread. Use the sketch to correctly explain your query.
Await your reply.
Adsorption System Configuration.xlsx 20.1KB 177 downloads
Similar Topics
How To Select Reboiler And Condenser Operating Pressures For A Mdea ReStarted by Guest_Alexis Azamar_* , 27 Mar 2024 |
|
|
||
Types Of Reboiler And CondenserStarted by Guest_refluxraider_* , 17 Mar 2024 |
|
|
||
Determining Operating Pressure For A Column Without CondenserStarted by Guest_phoroogh_* , 03 Feb 2024 |
|
|
||
Air-Cooled Condenser Symmetrical Inlet-OutletStarted by Guest_tdeb_* , 06 Nov 2023 |
|
|
||
Steam Condenser And Condensate TankStarted by Guest_J_B_* , 16 Jul 2023 |
|
|