Dana-F:
If you are really doing the simulated design package for a TEG natural gas dehydration unit, you should know that the water content in the regenerated, lean TEG entering the TEG contactor is the basic data requirement before you can simulate how many theoretical stages are required in the contactor.
So how can it be that you don’t even mention what regeneration process - there are various ones you can select and/or specify - you are planning to employ to allow you to produce the required 4.0 lb H2O/MMScf of gas product? It is not possible for you to simulate the contactor without specifying the composition of the lean TEG entering the contactor. Or are you assuming that the lean TEG will be 100% pure TEG? Are we in agreement on this basic fact? If so, then why is it that you don’t mention the regeneration process that will yield the lean TEG composition suitable for producing the stated product gas?
This information is so basic, that it makes me wonder what some engineers are doing by simulating a process when they fail to recognize and identify the basic data requirements even before they turn their computers on. I think you will agree that you must state the composition of the lean TEG BEFORE going into the exercise of calculating the required flow rate.
The bottom line here is that there is a basis for doubting whether you know the TEG process well enough to attempt to simulate it. Please put my skepticism to rest by explaining why you don’t give our members all the necessary basic data.