There seems to be more of these crude condensate process units being built these days. I am currently employed as a console operator for a new crude condensate unit. It consist of, a Pre-Fractionator, the overhead feeds the Depropanizer, Debutanizer.
The Pre-Frac. Bottoms Feeds the Main Fractionation column, the cuts are ATB, Diesel, Kero, Heavy Naphtha. We are using natural gas as stripping gas. My question is how would be the best way to raise the flash on the kero? Also how should the internal reflux and pumparounds be used without flooding the column?
|
0
Crude Condensate Process
Started by Mungiadl, Jun 25 2017 09:54 PM
1 reply to this topic
Share this topic:
Similar Topics
Heavy Crude PumpStarted by Guest_Rahimzadeh_* , 13 Apr 2024 |
|
|
||
Ammonium Sulfate Process SimulationStarted by Guest_amir55261_* , 06 Apr 2024 |
|
|
||
Mtbe Process Flow Diagram Master Thesis.Started by Guest_sayoub_* , 15 Feb 2024 |
|
|
||
Let Down Vessel In Methanol ProcessStarted by Guest_Manue_* , 21 Mar 2024 |
|
|
||
High Pressure Condensate Recovery To Low Pressure DeaeratorStarted by Guest_hd_1982_* , 16 Feb 2024 |
|
|