|
0
Storage Tank
Started by Abdullah_28, Sep 23 2017 02:13 AM
5 replies to this topic
Share this topic:
#1
Posted 23 September 2017 - 02:13 AM
Dear,
I hope you are fine.
I have questions regarding storage tanks design.
Before I start asking, I will mention the conditions of the storage tanks :
A)P(op) 0.3 barg
B)P (des) 0.7 barg
C)All stored liquids are none flammable (combustible)
D)All storage tanks in my area are blanketed with nitrogen due to sensitivity of reaction of air and humidity.
1-is API 620 is the right code (I chose this code)!?
2- How can we choice the roof and bottom type?!( fixed roof cone +flat bottom)
3-is nitrogen blanketing impact storage tank design !(dome roof or cone)
Thanks a lot
Abdullah
I hope you are fine.
I have questions regarding storage tanks design.
Before I start asking, I will mention the conditions of the storage tanks :
A)P(op) 0.3 barg
B)P (des) 0.7 barg
C)All stored liquids are none flammable (combustible)
D)All storage tanks in my area are blanketed with nitrogen due to sensitivity of reaction of air and humidity.
1-is API 620 is the right code (I chose this code)!?
2- How can we choice the roof and bottom type?!( fixed roof cone +flat bottom)
3-is nitrogen blanketing impact storage tank design !(dome roof or cone)
Thanks a lot
Abdullah
#2
Posted 23 September 2017 - 06:25 AM
Abdullah,
1) Yes,...
2) Depends on the tank diameter, stored liquid VP; but considering high OP and DP appears dome roof type is a better choice
3) No,...
#3
Posted 23 September 2017 - 11:33 AM
Hi ,
To add to the thread .
Breizh
#4
Posted 24 September 2017 - 02:01 AM
Dear fallah
Diameter of our tanks is not exceeding 7meters
Kindly ,can you clearly mention the reason of having dome not cone!?
By the way ,I chose the bottom as. Flat with slop
Engineer who did the previous phase , they used dome for top and bottom
Thanks alot
Diameter of our tanks is not exceeding 7meters
Kindly ,can you clearly mention the reason of having dome not cone!?
By the way ,I chose the bottom as. Flat with slop
Engineer who did the previous phase , they used dome for top and bottom
Thanks alot
#5
Posted 24 September 2017 - 02:05 AM
Dear fallah
I forget to tell you regarding the vapor pressure
It is very low (DPG-polyether)
I forget to tell you regarding the vapor pressure
It is very low (DPG-polyether)
#6
Posted 24 September 2017 - 04:02 AM
Abdullah,
Due to relative high OP and also having self supported roof, dome type is more interested; but having not so high diameter cone roof also feasible...
Similar Topics
Sulphuric Acid H2So4 Storage TankStarted by Guest_TeeEng_* , 08 Apr 2024 |
|
|
||
Butadiene StorageStarted by Guest_Mirzazada_* , 27 Mar 2021 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|
||
Green Diesel StorageStarted by Guest_Lucianaa_* , 16 Feb 2024 |
|
|
||
Determination Of The Number Of Foam Chambers For Storage TanksStarted by Guest_AnbIran_* , 15 Feb 2024 |
|
|