Hi All,
Can one unit have different steam-out conditions. If yes, then what is the reason for specifying the same.
Thanks in advance.
|
Posted 28 September 2017 - 08:27 AM
Hi All,
Can one unit have different steam-out conditions. If yes, then what is the reason for specifying the same.
Thanks in advance.
Posted 02 October 2017 - 02:21 AM
Hi,
Can anyone provide some input on the same.
Thanks in advance.
Posted 02 October 2017 - 07:03 AM
More details please. Your question is very general. "one unit" could be anything. Be specific. List all the different steam out conditions. Tell us what was used as the specification. I'm sure it is clear to you. Who do you think we are, The Amazing Kreskin?
Posted 02 October 2017 - 09:18 PM
Chemitofreak,
Its depends on the steam quality and function of the unit. If the steam in the Superheated state, there is no heat exchange and only small pressure depletion in the unit then steam-in and steam-out shall have same condition.
Steam Trap & Condensate RecoveryStarted by Guest_salihbaykal_* , 10 Jan 2024 |
|
|
||
Drain Line Sizing To Steam TrapStarted by Guest_RaifOzturk_* , 05 Jan 2024 |
|
|
||
Psv Relief Scenario (Steam)Started by Guest_panagiotis_* , 01 Jul 2023 |
|
|
||
Reducing Steam Consumption In Vacuum Packed DistillationStarted by Guest_dpunnn_* , 30 Nov 2023 |
|
|
||
Is There Any Rule Of Thumb For Estimation Of Steam Generation From FirStarted by Guest_AnbIran_* , 20 Nov 2023 |
|
|