What is difference b/w Steam /gas ratio and Steam / Carbon ratio ? in Steam methane reforming
|
Steam To Carbon Ratio
#1
Posted 03 October 2017 - 08:24 AM
#2
Posted 03 October 2017 - 03:38 PM
Hi,
In syngas plants (ammonia, hydrogen, methanol, etc.) the concepts are different. Steam to dry gas ratio (usually abbreviated as S/DG) is the ratio between molar flow rate of steam and gas, so it's steam flow rate divided dry gas flow rate. This ratio is use frequently at the inlet of shift reactors (HTS, high temperature shift, and LTS, low temperature shift), in particular to evaluate of the flow fed has enough steam as to prevent iron carbide formation in iron-based HTS catalysts.
Steam to carbon ratio is usually used to evaluate the amount of steam at the inlet of a steam reformer, and is the ratio between the steam and the carbon, in mole basis. Consider that C2H6 counts as 2 carbons, C3H8 as 3, etc. E.g. if you have a stream consisting of a mixture of 3000 mol/h of steam, 500 mol/h of C1, and 200 mol/h of C2, ethane counts twice as much (2 carbon moles), so in this case it would be 3000/(500+200*2) = 3.33. In this same case, the S/DG ratio would be simply (3000/700) = 4.28 (though in practice no HTS reactor operates with such a high value).
Theoretically speaking, in the case of a stream consisting of just steam and methane, S/DG and S/C ratio would be the same. In the case of a stream with only steam, methane, and some nitrogen, the S/DG ratio would differ from the S/C ratio. There are some other ratios used, such as the S/C ratio just for hydrocarbons (so you don't consider inorganic compounds such as CO or CO2) or the S/HCC ratio (you just consider HC C2+).
Hope it was clear enough
Best regards
#3
Posted 13 October 2017 - 02:55 PM
Thanks a lot
#4
Posted 04 November 2021 - 09:10 AM
when technology licensors indicate steam to carbon ratio, or when we come across steam to carbon ratios of say 3, I want to know if C atoms of CO2 in the natural gas feed is also included in the calculations(in the denominator)? or is it only the hydrocarbons whose carbon moles are counted? can somebody help? I am trying to interpret exactly what these ratios mean in a simulation
Similar Topics
Answered
Steam Pressure Requirements For Limpet Batch ReactorStarted by Guest_golegolegole_* , 10 Apr 2024 |
|
|
||
Steam AccumulatorStarted by Guest_Valeriacortez11_* , 15 Apr 2024 |
|
|
||
Valves On Low Pressure Steam ServiceStarted by Guest_Ali4269278331_* , 15 Apr 2024 |
|
|
||
Steam Trap & Condensate RecoveryStarted by Guest_salihbaykal_* , 10 Jan 2024 |
|
|
||
Drain Line Sizing To Steam TrapStarted by Guest_RaifOzturk_* , 05 Jan 2024 |
|
|