I have separately modelled EDR rigorous exchangers in Aspen EDR. Also I have done my process modelling in aspen Refsys for one of the plants . I have connected EDR exchangers in my plant model. But when I connected EDR exchangers in my model, I am getting following error : Pressure drop calculated is too high: 10 Percent pressure drop has been used. How to resolve this error. I tried to tune fouling factors also. but with no success. Please help me
|
0
Aspen Hysys Edr
Started by CHEMSTRONG, May 03 2018 09:25 AM
1 reply to this topic
Share this topic:
Similar Topics
Olga And Aspen Simulation SoftwareStarted by Guest_CHEMSTRONG_* , Yesterday, 06:05 AM |
|
|
||
Answered
Centrifugal Compressor Performance Curves In Aspen HysesStarted by Guest_Rafcio_* , 14 Mar 2024 |
|
|
||
Aspen Custom Model Won't Load Into HysysStarted by Guest_SaintLazarus_* , 21 Mar 2024 |
|
|
||
Aspen Hysys SimulationStarted by Guest_amazingspidermean_* , 18 Mar 2024 |
|
|
||
Insert A Reaction In Aspen Adsim By Compiling FortranStarted by Guest_Sara@1371_* , 12 Mar 2024 |
|
|